Liberon Natural Finish Floor Varnish is a water-based hard wearing and long lasting floor varnish that is designed for use on softwood and hardwood flooring.
Liberon Natural Finish Floor Varnish has a non-yellowing, quick drying formula which maintains the natural feel and look of the timber. If you wish to add colour to the floor this varnish can be mixed with . Please note that this will not produce as deep a colour as if the dye had been applied directly to the wood. If a deeper colour is needed then dye the wood first with . A minimum of 8 hours drying time should be allowed before applying the varnish to a dyed surface.
Application: Firstly, remove any previous finish and ensure the floor is clean, dry and dust-free. Old wax deposits can be lifted with . Old varnish can be treated with a suitable .
Stir well before use and apply evenly with a or . Allow to dry for minimum of 2 hours before applying further coats. A minimum of 3 coats is recommended but additional coats may be needed for heavy traffic areas. After the final coat leave for a minimum of 24 hours before subjecting the surface to use
For general maintenance of the floor, just wipe with a damp cloth or mop. A mild detergent can be used if needed. Any spillages should be wiped up immediately. If the surface begins to show signs of wear and tear, apply a fresh coat of varnish. Alternatively, treat the surface with .
Liberon Natural Finish Floor Varnish is not suitable for applying over an oil based sealer.
