Product Details
＋
Overview
Completley block and cover stains such as water, nicotine, soot, grease, ballpoint pen, wax, and lipstick with Polycell's hardworking Stain Block available as paint or handy aerosol. It's highly suited to large problem areas and can be overcoated with your desired colour.
- Quick drying
- Covers a wide range of stains
- Suitable for large problem areas
| Area | Interior |
| Recommended Use | Plasterboard, plaster, interior masonry, natural stone and insulating board |
| Coverage | Up to 9m² per litre |
| Drying Time | Aerosol 10 minutes, paint 12 hours |
| Re-Coat Time | 12 Hours |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush or aerosol |
| VOC Levels | High - Very High |
Preparation
Ensure surfaces are clean, dry, and free from loose or flaking materials. For any stains caused by damp or water, ensure the cause of the issue has been rectified prior to application.
Application
Always follow the manufacturer's instructions found on the packaging. Test on a small area of the surface to ensure compatibility.
- Stir thoroughly prior to use, apply using a brush or roller.
- Apply directly onto the affected area either 1 or 2 coats as required.
- Allow 12 hours before overpainting, if painting with an oil-based paint first primer with water-based paint.
