Product Details ＋

Overview

Sandtex® Trade X-Treme X-Posure Smooth Masonry paint is a water-based exterior paint that offers ultimate protection against the elements. Formulated to provide up to 20 years of weatherproof protection, it dries quickly to give a high opacity, smooth matt finish. It is a highly flexible and dirt-resistant finish that expands and contracts with the substrate, offering superb protection from the damaging effects of the weather including water and frost damage.

Ideal for use on rendering, roughcast, pebbledash, concrete, building blocks, emulsion or masonry painted surfaces.

Low sheen, matt finish
Dirt resistant and highly flexible
20 years’ weatherproof protection
Fast drying and quick recoat times
Excellent adhesion to many exterior surfaces

Area	Exterior
Recommended Use	Rendering, Roughcast, Pebbledash, Concrete, Building Blocks, Emulsion or Masonry Painted Surfaces.
Base	Water-Based
Coverage	Up to 16m² per litre
Drying Time	30 minutes
Re-Coat Time	2-4 hours
Recommended Coats	2 coats
Application Method	Brush, Roller or Airless spray
Clean Up	Wash equipment with clean, cold water

Preparation

Always ensure the surface is clean, dry and free from anything that may affect adhesion.

Previously painted gloss surfaces will need to be abraded to provide a key.
Loose or flaking material will need to be removed by scraping or brushing with a stiff bristled brush.
Remove any organic growth by applying in accordance with the manufacturers instructions.
Any surfaces that are porous or chalking should be treated with prior to the application of Sandtex Trade X-treme X-posure Smooth Masonry paint.

Application

We always recommend performing a test patch to the surface to be decorated to ensure you are happy with the finished results.

Stir well, always intermix packs in a larger container for colour consistency.
Apply using a 4-inch brush, exterior roller or airless sprayer.
If necessary Sandtex Trade X-treme X-posure may be thinned by up to 10% with clean water for airless spray application (21 thou tip 65º angle).
On new surfaces it may be necessary to dilute the paint with up to 40% clean water followed by two full coats.
Allow to dry for 2-4 hours between coats, two coats are recommended for maximum durability.
Do not apply when there is a risk of rain, frost or if the temperature will fall below 7ºC during the application and drying period.

Always follow the manufacturer's instructions found on the packaging.